ASUS Keyboard Replacement Guide
ASUS covers a wide range of consumer laptops, and the keyboard job follows the generation, not the badge. On the ASUS N53 / K53S family in the video below, the full keyboard is removed and a new full keyboard is fitted as a complete unit. Other ASUS generations differ — some keyboards release from the top, some are serviced from inside, and some come as part of a palmrest assembly — so match by exact model and part number before ordering. Use the video for the method, and the listing for the part.
Watch: ASUS N53 / K53S full keyboard replacement
A complete N53 / K53S replacement from the site owner's own channel (@FIXKEY): around a quarter of the way in, the old keyboard is lifted clear and its ribbon cable is disconnected; around halfway in, the new full keyboard is pressed into the keyboard slot and seated; by the end of the video the fitted keyboard is being typing-tested. Watch the seating closely — on this generation the keyboard presses into the slot, and a cable left loose or a keyboard left unseated is what leaves keys dead or the keyboard flexing.
Before you start
- Shut down, unplug, and photograph each stage. ASUS models mix screw types and lengths, so keep screws grouped by stage.
- Confirm the exact model (for example N53 / K53S vs X451 vs Zenbook 14 UX3402 vs Vivobook S14) and, wherever possible, the part number on your old keyboard's label — see how to find your keyboard part number. The same ASUS badge covers several different keyboards, and layout and backlight also vary.
- Check whether your replacement is a bare keyboard or a keyboard with frame / palmrest assembly. The N53 / K53S in the video takes a full keyboard unit pressed into the slot; an assembly-type listing may swap differently, so follow your part's fixings, not this video's, where they differ.
- Tools: small Phillips driver, plastic spudger, tweezers. Work on a clean, non-slip surface, and keep the battery disconnected until the keyboard is tested.
Steps
- Remove the bottom cover screws and lift the cover away, working around the seam with a plastic tool.
- Disconnect the battery first — before touching any other connector.
- Work through the internal components as the video shows, freeing the keyboard ribbon cable at its connector: release the locking flap, slide the cable out squarely, and note its fold and routing.
- Lift the old keyboard out of the slot — on the N53 / K53S this means lifting the backplate clear and disconnecting the cable; on top-release or assembly models the release is different, so follow your generation's fixings, not this video's, where they differ.
- Seat the replacement keyboard, pressing it into the slot as your generation requires, reconnect its ribbon cable (fully inserted, locking flap closed), reconnect the battery temporarily, and test every key before the machine is closed up.
- Reassemble in reverse order.
Connector technique and post-repair troubleshooting live in the general guide: How to Replace a Laptop Keyboard.
ASUS keyboards we stock
Browse ASUS keyboards — 18 visible listings across the X301, X451, X551, Zenbook 14, Vivobook S14, X507, E402, E502 and ProArt StudioBook families, in several layouts. Check the model series and the part number against the listing before ordering — the N53 / K53S in the video is the worked example of the method, not a guarantee that your family's part matches it.